Simoniz High Pressure Washer Owner's Manual download pdf (Page 9)

15 16

CAUTION

Draingunassemblyofanyremainingwater.Aimgundownwardsandsqueezetrigger.

WINTERIZING AND LONG-TERM STORAGE

OptimumWinterizingProcedure

Winterizing your pressure washer will help protect and prolong its life. We strongly

recommend you follow the below steps using antifreeze. Prepare the pressure washer

for storage by running a 50/50 mix of water and antifreeze into the unit. This will keep the

internal parts lubricated, protected from rust, and prevents the pump from freezing.

1. Connect the antifreeze hose onto the adaptorand quick-connect coupling.

2. Depress button on top of antifreeze container.

3.Continueuntiluidexitsthepumpoutlet.

4. Remove the hose from pump inlet.

QuickWinterizingProcedure

If you cannot do the Optimum Winterizing

procedure, you can still protect your

pressure washer from winter damage by

doing the below:

1. Disconnect all water connections.

2. Turn on the machine for a few seconds,

until the remaining water in the pump

exits. Turn off immediately.

3. Do not allow high-pressure hose to

become kinked.

4. Store the machine and accessories in

a room that does not reach freezing

temperatures. Do not store near furnace

or other sources of heat as it may dry out

the pump seals.

Recommended: Pressure Washer

Antifreeze (039-8602-0)

CLEANING AND MAINTENANCE

Connections

Connections on pressure washer hoses, gun and spray wand should be cleaned regularly

and lubricated with non-water soluble grease.

AdjustableNozzleOnly

Clogging of the nozzle causes the pump

pressure to be too high and cleaning is

immediately required. You can clean the

nozzle by carefully inserting a thin, sharp

instrument (i.e. paperclip) into teh tip to rid

it of deposits.

Foretheadjustablenozzle,youcanalso

lubricate the nozzle collar (high pressure/

low pressure) by using non-water soluble

grease regularly.

WaterFilterScreen

The pressure washer is equipped with a

water inlet screen to protect the pump.

Ifthescreenisnotkeptclean,theow

of water to the pressure washer will be

restricted and the pump may be damaged.

1. To clean inner water screen, remove

quick-connector and remove the ﬁlter

screen from the pump inlet.

2. Rinse screen until it is free of debris

and blockage.

3. Replace screen and quick-connector

immediately to prevent any foreign

matter from entering the pump.

Air Vents

The air vents located on the back of the unit must be kept clean and free of any

obstructions to ensure proper air cooling of the motor during operation.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Simoniz High Pressure Washer Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for High-pressure cleaners Simoniz High Pressure Washer