Simoniz High Pressure Washer Operations Instructions download pdf (Page 14)

8. CLEANING AND MAINTENANCE

8.1 Connections

The connections on the pressure washer’s hoses, gun, and spray

wand should be cleaned and lubricated with non-water soluble

grease regularly.

8.2 Adjustable Nozzle Only

Clogging of the nozzle causes the pump pressure to be too

high, making it necessary to clean the nozzle immediately.

You can clean the nozzle by carefully inserting the Cleaning

Needle (G) or a thin, sharp instrument (i.e. paperclip) into the

tip to clean out any deposits.

8.3 Water Filter Screen

The pressure washer is equipped with a water inlet screen to

protect the pump. If the screen is not kept clean, the ow of

water to the pressure washer will be restricted, and the pump

may become damaged.

To clean the water inlet screen:

• Remove the lter screen from inside the inlet adapter

(the inlet adapter comes pre-assembled to the machine).

• Rinse the screen until it is free of debris and obstructions.

• Place the screen back to prevent foreign particles from

entering the pump.

9. TECHNICAL SPECIFICATIONS

Peak pressure: 1600 PSI

Rated max pressure: 1000 PSI

Power source requirement: 120 V / 60 Hz

Electrical cord: 7m (23’) 18 AWG

High-pressure hose: 6m (20’)

US GPM (US gal/min): 1.25 GPM

Current drawn: 10 A

Inlet water: Cold tap water

Cleaning and Maintenance / Technical Specications

1 2 ... 9 10 11 12 13 14 15 16 17

No comments

Simoniz High Pressure Washer Operations Instructions Page 14